UNICA SAFE

UNICA SAFE

safe program

The machine is provided with a safety device able to prevent the worker from any injures that may happen with the saw blade.

SEE HOW THE SYSTEM INTERVENES

> DISCOVER

safe per sito

The hand at the contact with the blade does not undergo any cutting.

 

  • The blade is loaded under low electrical voltage
  • When human skin touches the blade, the electric signal of the blade changes because the human body is conductive
  • The change of electric signal activates immediately the piston with the electronic security system
  • The blade disappears
safety system

When the blade retracts, it reaches a speed so high as to ensure the removal of the blade from the finger only after about 5 milliseconds from the contact.

safety system

Once the safety system has been activated, it will be re‐charged automatically in 2 minutes and the panel saw will immediately be ready for use.

safety hand

“If the system gets activated, it means that we have saved a hand.”

TECHNICAL DATA

SLIDING TABLE

Sliding table sizes Cross-cut Capacity
385 x 2150 mm 2170 mm
385 x 2600 mm 2700 mm
385 x 3200 mm 3260 mm
385 x 3800 mm 3870 mm
385 x 4300 mm 4370 mm

CUTTING HEIGHTS

Cut height at 90° 130 mm
Cut height at 45° 90 mm

BLADE

Main blade dia. (standard) 400 mm
Blade tilting -1°+46°
Scoring unit blade dia. 125 mm

VIEW ALL THE MODELS

UNICA SAFE E

unica safe

STANDARD EQUIPMENT

  • Blade fixed speed 4000 rpm
  • Motorized lifting and tilting movement of the blade
  • Electronic digital read-out of blade lifting and tilting

OPTION

panel board

Adjustable Overhead Control Panel Board.

display

Electronic digital display for lifting of the blade.

UNICA SAFE EVO

safe evo

STANDARD EQUIPMENT

  • Blade fixed speed 4000 rpm
  • Motorized lifting and tilting movement of the blade
  • Electronic digital display of blade tilting
  • Motorized and displayed rip fence, with 2 speeds and decimal positioning
  • Adjustable overhead control panel board

UNICA SAFE DIGIT 3 AXES

STANDARD EQUIPMENT

  • Start with inverter with speed variation from 2000 to 6000 rpm
  • Motorized lifting and tilting movement of the blade
  • Electronic programmer with colour video graphic colour touch screen 4″ – PLC SIEMENS
  • Programming of blade height and tilt with automatic correction of the height in relation to tilting movement
  • Programming of the rip fence position with automatic compensation of the height with tilt blade
  • Rip fence unit hiding completely under the working table
  • Rip fence driven by re-circulating ball screw and precision linear guide
  • Automatic calculation of upper and lower height of the panel to cut
  • Possibility to memorize up to 100 working value
  • Display of the blade rotation speed
  • Adjustable overhead control panel board

OPTION

panel 4

Electronic programmer with colour video graphic touch screen 4″ Siemens

UNICA SAFE PROGRAM 3 AXES

safe program

STANDARD EQUIPMENT

  • Electronic display of the scoring unit with light led
  • Electronic programmer SIEMENS TOUCH SCREEN with graphic colour touch screen 7″ or 12″ widescreen- PLC SIEMENS
  • Programming of the rip fence
  • Programming of the blade lifting
  • Programming of the blade tilt
  • Start with inverter with speed variation from 2000 to 6000 rpm

PROGRAM 3 machines are complete with:

  • Programming of rip fence position with automatic compensation of the size with blade tilt
  • Automatic calculation of the upper and lower height of the panel to cut
  • Rip fence driven by re-circulating ball screw and precision linear guide.
    Translation speed max. 15 m/1′
  • Programming of blade lifting in relation to the thickness of the panel to be cut and blade tilting
  • Blade tilting programming
  • Automatic calculation of the position value of the flip over stop on extensible fence of the cross-cut carriage.
    (The result is the upper and lower value of the panel to be cut and the compensation of the value with blade tilt.)
  • Possibility to memorize up to 650 working programs on 3 axes
  • Programming of max. 10 sequential values of the three axes with each program
  • Calculation of the tilting angle of the fence of the cross cut carriage
  • Function to take quickly the blade in position for replacement as well as for speed change
  • Possibility to set multiple cuts
  • Possibility to memorize following data of the main and scoring blades: diameter, body thickness, tooth thickness
  • Automatic Display of data and alarm messages
  • Adjustable overhead control panel
  • USB port on the Adjustable overhead control panel
  • Rip fence unit hiding completely under the working table

OPTION

program

PC SIEMENS with graphic colour video TOUCH SCREEN


Ask for product information

I consent to the treatment of personal data in accordance with the conditions set out in Page of Privacy Policy *

Find out how the machine works

LOGO UNICA SAFE
SAFE LOGO

* Includes patents licensed from SawStop *